In buying for quality and high performance fish finder transducers, you need to know something better for you. In selecting fish finder transducer, several factors are being considered to include the material, mounting options, transducer power, display and even cone angles of the product you will purchase. You should be a lot careful when deciding in order to make the right decision.
The material for a fish transducer should be made of public housings, but fiber glasses or metal hulls are most recommended. These will also stainless steel housings are recommended than the steel or aluminum hulls. Practically, bronze is preferred than the plastic or wooden hulls because woods might as well damage a plastic transducer eventually causing leak. Likewise in the installation of a stainless steel housing in metal hulls requires insulating fairing. But, the metal housing should and must not be installed in any vessel with positive ground system.
How do we mount our transducer in a way that it serves the purpose buying the product? What is ideal? Well, ideally mounting through hull with fairing blocks is best recommend because of the quality of performance it gives especially at higher grounds. For trailer boats where performance is good, mount it though hull flush mounts and by in-hull transducers. Hull should not be penetrated.
Other tips in selecting fish finder transducer may be found familiar to them. It is the kind of display it provides. Sensible buyers must see to it that the depth, speed, temperature are displayed in the monitored.
– Of course the Power, transducer power is the strength with which transducer sends the sonar “ping” in watts. It is expected that fishermen would prefer high-powered transducer because fishermen are in wide seas and they meet and resist against the wrath of the typhoons, the super typhoons. High power transducer means have chances of getting a return echo in deep water or in poor conditions. Should these be the transducer they have, even the most disturbed waters caused by typhoons and trees, they must still provide better returns of echoes. Aside from that, accuracy of the transducer normally detects from bottom of the seas the depth. The ideal transducer frequencies are the 200KHZ and the 50KHZ (low).
– What do you mean by 200 KHZ (high) means that the performance of the transducer is only good at 200 ft or 60 meters depth while beyond this limits cannot be seen anymore by the sais transducer. On the other hand, cone angles for transducer has the capacity of transmitting sound into a beam.
Therefore, owners of fishing boat or fishermen should evaluate and canvass for the quality fish finder transducer which is of quality and cost –efficient. Fishermen should be aware of the common features which are considered the tips in selecting fish finder transducer. In this way they could buy for the best one especially that market has offered them a lot of options to choose. Whatever, options fishermen should take at least, they made the best quality and price .